Fortron 550W, FSP550-80GLC, ActivePFC, Separate 12V

• Voltage:
100-240 VAC full range
• Frequency: 47 Hz to 63 Hz
• Input current: 5 amps maximum / 115 Vrms, 60 Hz.
2.5 amps maximum / 230 Vrms, 50Hz

Output Specifications
• Over-voltage protection: +5V, +3.3V, +12V1, +12V2
• Over-current protection: +5V, +3.3V, +12V1, +12V2
• Remote ON/OFF control: The power supply shall accept a logic collector level which
will disable / enable all output voltage (excluding +5V standby).
• Overload protection: 150% max.
• Power good signal: 115/230V (full load) 100-500 ms

General Specifications
• MTBF:
100K hours at 25°C
• Efficiency: 75% min., at full load
• Hold-up time: 17.0 ms minimum: at 115V / 60 Hz
17.0 ms minimum: at 230V / 50 Hz

Environmental Specifications
• Operating conditions:
ambient temperature 0°C~50°C, 5~95% RH
• Storage and
shipping conditions: ambient temperature -20°C~80°C, 5~95% RH
• Dielectric strength: input / output 1800 VAC for 1 second,
input to frame ground 1800VAC for 1 second

Output

Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+3.3V 0.5A 30.0A +-5% 50mV P-P
+5V 0.3A 28.0A +-5% 50mV P-P
+12V1 1.0A 14A +-5% 120mV P-P
+12V2 1.0A 15.0A +-5% 120mV P-P
-12V 0.0A 0.3A +-10% 120mV P-P
+5Vsb 0.0A 2.0A +-5% 50mV P-P

.+3.3V & 5V total output shall not exceed 150W.
. Total output for this model's power supply is 400W.